How to Get the Survivor Box in MW4 DMZ

Published on:Nov 16,2026
Views:240

The Survivor Box is an Ultra Field Upgrade in Modern Warfare 4 DMZ Season 1. It allows you to deploy a supply box containing survival items that you and your teammates can use during a match. Unlike the Survival Kits available through the Forward Operating Base, the Survivor Box must be crafted at the in-world 3D Printer inside X01.

How to Get the Survivor Box in MW4 DMZ

The recipe requires one SR-16 Bio Agent Sample, two Ballistic Fabric, and three High-Tenacity Fibers. Players collecting MW4 DMZ Items should secure the Legendary sample first, as it is the key ingredient that determines whether the craft can go ahead.

 

Where to Craft the Survivor Box in X01

The Survivor Box recipe is exclusive to the X01 3D Printer. You cannot produce it at the regular FOB printer.

There are two ways to enter X01:

  • FOB deployment: Select X01 and choose Free Roam from the deployment menu. This option has been available since November 7, allowing you to load directly into the facility.
  • Hajin elevator: During a regular Hajin deployment, travel to the abandoned elevator shaft at grid B0 in the northwestern corner of the map. Activate the red ENGAGE control and enter the freight elevator with your squad. Anyone left outside will remain in Hajin.

No key or keycard is required to use the elevator.

Once inside X01, open the Tac-Map and locate Production Assembly at grid E5. The printer is in an upstairs office on the western side of the area. Use the ladder and follow the stairs in the northern section to reach the mezzanine office.

Bring all required materials in your backpack, select Survivor Box from the printer menu, and choose Print Item. Remember to collect the finished Field Upgrade before leaving the office. Simply opening the printer menu does not complete the craft.

X01 also has a Toxic Gas Spreading In countdown that starts at approximately 20 minutes. If the Survivor Box is your main objective, prioritize crafting before spending time exploring other sections. Once the item is collected, move toward an available extraction route before the facility begins closing its exits.

 

Survivor Box Recipe and Total Material Cost

Each Survivor Box requires the following ingredients:

MaterialQuantityRarity
SR-16 Bio Agent Sample1Legendary
Ballistic Fabric2Epic
High-Tenacity Fibers3Rare

The recipe does not list an additional DMZ Cash charge.

There is an extra material cost to consider if you plan to print Ballistic Fabric at the FOB rather than collecting both pieces directly. Each Ballistic Fabric requires 100 Synthetics and three High-Tenacity Fibers, and you must have the Epic Ingredient Printing upgrade unlocked.

Printing two Ballistic Fabric therefore consumes:

  • 200 Synthetics
  • 6 High-Tenacity Fibers

Add the three fibers required by the Survivor Box itself, and the total becomes nine High-Tenacity Fibers.

This is an important preparation detail because High-Tenacity Fibers cannot be printed separately. You must loot them or have enough in your existing inventory before starting the crafting process.

 

How to Get the SR-16 Bio Agent Sample

The SR-16 Bio Agent Sample is the most important part of this recipe. One reliable progression route is completing page 4 of Ghost’s X01 Orders, which includes Racing the Hour, The Vault, and Complete Defusal.

  • Completing this page rewards:
  • One SR-16 Bio Agent Sample
  • One 3-Plate Ballistic Gel Vest
  • The Staff Emergency Exfil Keycard recipe
  • $20,000

The objectives require you to override the bioweapon release in the Bio Lab canister chamber, eliminate The Captain, collect the X01 Vault Access Keycard from his body, enter the Deep Vault, neutralize the bioweapon in the Core Room, and kill Blix inside the vault.

You do not necessarily have to complete every objective in one deployment. The Bio Lab override, The Captain elimination, and keycard collection remain completed if you leave or are eliminated before finishing the vault section. You can return in a later deployment to complete the remaining objectives.

Another possible source is Deep Vault Room 406, where a loose SR-16 Bio Agent Sample has been reported. However, it does not appear in every match.

Room 406 is on Floor 1 at grid C2. Follow the stairs marked 4 and continue along the railed corridor to reach the room, which contains four safes. Its access card can appear on the desk in the Executive Room within the Admin Offices, which is opened using the Executive Room card.

Whenever you obtain the sample, place it in a secure slot as soon as possible. This reduces the risk of losing the rare ingredient if you are eliminated before extraction.

Important: Do not confuse the SR-16 Bio Agent Sample with the Bio-agent Sample collected during Operation Shopping Hacks. That Story Mission requires a sample from the NuriGO Mall lab vault, but it is not the Legendary SR-16 ingredient required for the Survivor Box recipe.

 

Where to Find Ballistic Fabric and High-Tenacity Fibers

Both materials can be prepared before entering X01. The in-game Ingredient Locations hint points players toward two main search areas:

Chang-san Air Base

Search the armory and barracks in western Hajin. Check lockers, bags, and other containers while clearing the buildings. These areas are useful for finding High-Tenacity Fibers and other crafting materials, although no individual container guarantees a specific drop.

La Grande Vie at Songdo Wharf

Enter the tall building through its rear entrance, take the elevator upward, and follow the rear stairs to the rooftop. Search the rooftop containers for the required fibers and other ingredients.

If you already have Epic Ingredient Printing unlocked at the FOB, you can also produce Ballistic Fabric using 100 Synthetics and three High-Tenacity Fibers per piece. This reduces the amount of fabric you need to find directly, but it does not remove the need to collect the fibers.

For a single Survivor Box, prepare either two Ballistic Fabric and three additional fibers, or enough resources to print the fabric beforehand. If you choose the printing route, nine High-Tenacity Fibers are needed in total.

 

How to Use the Survivor Box

Once crafted and collected, Survivor Box appears in the Field Upgrades category. Activate it when your squad needs additional survival supplies, and it deploys a box that teammates can access.

Its value comes from providing a shared supply point rather than simply adding another item to your inventory. It is more useful during a coordinated deployment when teammates can gather around the box and take the available supplies.

Avoid using it immediately after leaving the printer office if the squad does not need it yet. Keep the Field Upgrade available for a more demanding encounter or a situation where the team needs additional resources.

Players considering MW4 Bot Lobbies for progression should still distinguish between general leveling and this specific crafting objective. The Survivor Box requires its exact X01 recipe ingredients, so preparing the SR-16 sample and fibers remains essential.

 

FAQs

Can I craft the Survivor Box at the FOB?

No. The recipe is available at the in-world 3D Printer inside X01, specifically in the Production Assembly office at grid E5. The regular FOB printer does not offer this recipe.

What materials are needed to print the Survivor Box?

You need one SR-16 Bio Agent Sample, two Ballistic Fabric, and three High-Tenacity Fibers. There is no additional DMZ Cash cost listed for the recipe.

Where can I get the SR-16 Bio Agent Sample?

You can earn one by completing page 4 of Ghost’s X01 Orders. A loose sample has also been reported in Deep Vault Room 406, although it is not guaranteed to appear in every match.

Is the Bio-agent Sample from Operation Shopping Hacks the correct ingredient?

No. The sample from the NuriGO Mall lab vault is a different mission item. The Survivor Box specifically requires the Legendary SR-16 Bio Agent Sample.

Can I print Ballistic Fabric at the FOB?

Yes. With Epic Ingredient Printing unlocked, each Ballistic Fabric costs 100 Synthetics and three High-Tenacity Fibers. You need two pieces for the Survivor Box.

How many High-Tenacity Fibers do I need if I print the fabric?

Nine in total: six for printing two Ballistic Fabric and another three for the Survivor Box recipe. High-Tenacity Fibers cannot be printed independently.

Can I complete Ghost’s fourth X01 Orders page in multiple deployments?

The Bio Lab override, The Captain elimination, and keycard collection remain completed if you leave or go down before finishing the Deep Vault section. You can return later to complete the remaining objectives.

What does the Survivor Box do?

It is a Field Upgrade that deploys a box of survival items for you and your teammates to collect. It is a shared supply option rather than a conventional armor or weapon upgrade.

The most efficient preparation is to secure the SR-16 Bio Agent Sample first, gather the required fibers, and decide whether to loot or print the Ballistic Fabric. If you use the FOB printing method, remember to reserve nine High-Tenacity Fibers rather than only the three listed in the Survivor Box recipe.

Once your backpack contains all three required ingredients, enter X01, head directly to Production Assembly, and complete the craft before the toxic gas timer becomes a problem. Collect the finished Field Upgrade and extract with enough time to spare.

With the right preparation, the Survivor Box becomes a straightforward X01 crafting objective instead of a costly deployment spent searching for one missing ingredient.

 

 

 

The U4GM Team


SHARE

Recommended Article
Select a Game