ARC Raiders: How to Get the Emperor Modulator

The Emperor Modulator is a Legendary crafting material in ARC Raiders required to upgrade your Gunsmith to Level 4. Introduced in the Frozen Trail update, this rare item can be found inside the Fallen Emperor dungeon on Pendola Pass.

To get the Emperor Modulator, you first need an Emperor Gateway Conduit to unlock the dungeon entrance. You can craft this key by obtaining its blueprint and collecting three different ARC Couplers during the Redirection map condition. Once inside the Fallen Emperor, explore the dungeon, search its loot containers, and extract safely with the Modulator.

Since the item is not guaranteed to appear in every run, preparing the right equipment and knowing where to search will help you make the most of each expedition.

What Is the Emperor Modulator in ARC Raiders?

The Emperor Modulator is a Legendary material used to upgrade the Gunsmith from Level 3 to Level 4. This upgrade is an important step toward unlocking the weapon amplification system introduced in Frozen Trail.

To upgrade your Gunsmith to Level 4, you need:

• 3 Radial Presses
• 3 Magnetic Accelerators
• 1 Emperor Modulator

The Emperor Modulator is the main challenge because it requires entering the Fallen Emperor and searching its interior for valuable loot.

Once your Gunsmith reaches Level 4, you can access weapon amplification through the Weapon Upgrades tab. However, upgrading the Gunsmith and amplifying individual weapons are separate processes. You will still need the appropriate Amplification Modules, research, and additional materials to improve eligible weapons.

How to Get the Emperor Modulator in ARC Raiders

Getting the Emperor Modulator involves three main steps: finding the Emperor Gateway Conduit Blueprint, collecting the required ARC Couplers, and exploring the Fallen Emperor dungeon.

Find the Emperor Gateway Conduit Blueprint

The Emperor Gateway Conduit is the key required to unlock the Fallen Emperor's entrance. Its blueprint can be obtained from Harvester Payloads during the Redirection map condition on Pendola Pass.

Follow these steps to find it:

• Enter Pendola Pass during Redirection. Check the map selection screen for the Redirection condition before deploying.
• Find a Damaged Emperor Relay. Look for the marked relay locations and the red beam that identifies a relay in the environment.
• Collect the Emperor Beacon. Interact with the relay to obtain the beacon.
• Deploy the beacon in an open area. Move away from the landing zone and take cover while the Harvester Payload descends.
• Search the payload. Once it is safe, search the large central container for the Emperor Gateway Conduit Blueprint and the ARC Couplers needed for crafting.

The blueprint and Couplers are random drops, so you may need to complete the event several times before collecting everything.

Other Raiders may also be attracted to the payload. Stay alert while searching, and be prepared to defend yourself or leave if the area becomes too dangerous.

If you obtain the blueprint, prioritize securing it and extracting successfully. You must learn the blueprint before you can craft the Conduit.

Collect the Three ARC Couplers

To craft an Emperor Gateway Conduit, you need one of each of these materials:

• ARC Conductive Coupler
• ARC Insulated Coupler
• ARC Plated Coupler

All three Couplers can be found in Harvester Payloads during Redirection on Pendola Pass. Each type drops randomly, so finding one does not guarantee that the others will appear in the same payload.

Check your inventory after every successful search to see which materials you still need. If you find a rare Coupler, consider extracting rather than risking it in an unnecessary fight.

You can continue farming the Redirection event until you have the blueprint and all three Couplers. Once you have extracted with the required ARC Raiders Items, learn the blueprint at your Outpost and prepare to craft the key.

Craft the Emperor Gateway Conduit

After learning the blueprint and collecting all three ARC Couplers, return to your Outpost and use Workbench I to craft the Emperor Gateway Conduit.

The crafting recipe requires:

• 1 ARC Conductive Coupler
• 1 ARC Insulated Coupler
• 1 ARC Plated Coupler

Make sure the finished Conduit is in your inventory before entering your next raid. You will need to bring it to the Fallen Emperor to unlock the dungeon entrance.

There is also an alternative way to obtain a Conduit. The Frozen Trail Reward Pass provides one at Tier 60, allowing you to access the dungeon without first completing the entire blueprint-farming process. However, receiving this reward does not give you the crafting ARC Raiders blueprint for making additional Conduits.

Where to Find the Fallen Emperor Dungeon

The Fallen Emperor is located on Pendola Pass. Look for the enormous fallen ARC machine and head toward its base to find the entrance.

Bring your Emperor Gateway Conduit into the raid and locate the access point near the machine's hull. Interact with the designated panel and use the Conduit to unlock the entrance.

Before entering, make sure you have enough ammunition, healing items, and suitable armor. A Snap Hook can also help with vertical traversal in certain sections of the dungeon.

It is worth planning your extraction route before going inside. The Fallen Emperor contains dangerous enemies and environmental hazards, and reaching the loot room is only half the challenge. You still need to get your valuable items back to safety.

How to Find the Emperor Modulator Inside the Dungeon

Navigate the Dungeon Traps and Rooms

The Fallen Emperor contains several rooms with different layouts, traversal challenges, and environmental hazards. The exact route can change between runs, so do not assume that every expedition will follow the same sequence.

Depending on the layout, you may encounter Hydra turrets, Crusher hazards, laser tunnels, and sections that require careful movement or the use of a Snap Hook.

Take your time when approaching unfamiliar areas. Watch for active traps, look for safe paths, and avoid rushing through narrow corridors without checking for threats.

Some encounters reward careful positioning and good timing more than aggressive combat. Conserve ammunition and healing supplies whenever possible, especially if you still have several rooms to explore.

Search the Final Loot Room

Your main objective is to reach the final loot area and search all available containers.

Check the loot pods, breachable containers, and storage areas instead of opening only the most obvious boxes. Pay particular attention to yellow wall nodes. Destroying these nodes can reveal additional loot racks and give you more opportunities to find valuable items.

The Emperor Modulator is random loot rather than a guaranteed reward for completing the dungeon. Even if you reach the final room, you may need to return for another run.

When you find the Modulator, place it in your Safe Pocket as soon as possible if your loadout allows it. This helps protect the item if you die before extraction.

Once the Modulator is secured, consider leaving rather than taking unnecessary risks for extra loot. Your priority should be getting the material back to your Outpost.

Best Tips for Farming Emperor Modulators

Prioritize Redirection when preparing for the dungeon. Use this map condition to collect the blueprint and all three ARC Couplers. Having the required materials ready will make future dungeon runs much easier.

Protect the blueprint and Couplers. These items are essential for opening the Fallen Emperor. Once you find what you need, avoid unnecessary fights and focus on extracting safely.

Bring suitable equipment. Carry enough ammunition, healing supplies, and armor to handle ARC enemies and environmental hazards. Traversal equipment can also be useful when navigating vertical sections.

Search every accessible loot area. Do not stop after checking the first few containers. Search breachable pods and storage racks, and destroy yellow wall nodes when it is safe to do so.

Use your Safe Pocket wisely. Protect the Emperor Modulator as soon as you find it. This reduces the risk of losing a valuable upgrade material before you can return to your Outpost.

Know when to extract. Additional loot may be tempting, but carrying the Modulator out safely is more important than filling every inventory slot. Plan your exit and avoid unnecessary encounters once you have secured your objective.

What Is the Emperor Modulator Used For?

The Emperor Modulator is required to upgrade the Gunsmith from Level 3 to Level 4. You also need three Radial Presses and three Magnetic Accelerators to complete the upgrade.

Gunsmith Level 4 unlocks weapon amplification, allowing eligible weapons to access additional upgrade options. However, amplifying a weapon requires separate resources, including an appropriate Amplification Module and other materials, as well as the necessary research.

If your goal is to progress through the weapon amplification system, obtaining the Emperor Modulator should be one of your priorities. Once you have it, you can focus on completing the remaining Gunsmith upgrade requirements and collecting the resources needed for your preferred weapons.

Frequently Asked Questions

Where does the Emperor Modulator spawn in ARC Raiders?

The Emperor Modulator can be found as random loot inside the Fallen Emperor dungeon on Pendola Pass. Search the final loot room, breachable pods, and other accessible containers. Its exact location is not fixed, and it may not appear in every run.

Do I need an Emperor Gateway Conduit to enter the dungeon?

The normal entry route requires an Emperor Gateway Conduit to unlock the Fallen Emperor's entrance. You can craft one at Workbench I after learning its blueprint and collecting the three required ARC Couplers. The Frozen Trail Reward Pass also provides a Conduit at Tier 60.

Can I get the Emperor Modulator on every run?

No. The Emperor Modulator is not guaranteed to drop during every dungeon run. Search all available loot areas carefully and be prepared to make additional attempts if you do not find it.

What is the Emperor Modulator used for?

The Emperor Modulator is a Legendary material required to upgrade the Gunsmith to Level 4. The upgrade also requires three Radial Presses and three Magnetic Accelerators. Reaching Gunsmith Level 4 unlocks weapon amplification, which has its own material and research requirements.

Getting the Emperor Modulator in ARC Raiders requires preparation, patience, and a successful trip through the Fallen Emperor dungeon. Start by farming Harvester Payloads during Redirection on Pendola Pass, collect the Emperor Gateway Conduit Blueprint and all three ARC Couplers, and craft your key at Workbench I.

Once you unlock the dungeon, navigate its hazards carefully and search every available loot area. The Modulator is not guaranteed to appear, so protect valuable finds and prioritize extraction whenever you obtain one.

With the Emperor Modulator secured, you can move closer to Gunsmith Level 4 and unlock the next stage of weapon progression in ARC Raiders.

The U4GM Team